Fire Detection: Fire Panel & Sprinkler Communication Solutions
A Special Notice To Toronto Fire Alarm Monitoring Clients
|
Prevent a Catastrophic Fire With The Right Kind of Heat and Fire Detection Devices.
Integrating fire protection and burglary protection has never been easier.
Having a monitored smoke detector at your premises ensures that the fire department will be contacted if you have a fire emergency.
A good photoelectric smoke detector will detect smoke particles caused even by a slow smoldering fire.
If you are not at your place of business, and do not have a monitored smoke detector, odds are no one will hear your smoke alarm when you have a fire condition! Therefore it is important that someone monitors this device 24 hours a day! Insurance companies also recognize the benefits of adding a monitored smoke detector to your business and typically offer a greater discount off of your premiums.
Now add a monitored smoke detector to your alarm at no additional cost to your monthly monitoring service. Business property was involved in 60% of the structural fires started by arsonists. With this service, your smoke detector is continuously monitored through a 24 hour zone, even when your alarm system is not armed!
Would you like to add a smoke detector or flood sensor to your existing alarm system and pay nothing for either the device or the labour to install it? You only pay a nominal $5.00 more per month to have these additional hazards monitored. Often you will receive a greater discount off your insurance which will cover the additional cost.
With MAXSYS fire products you have all the equipment you need to integrate full commercial fire into any security application.
This Fire Monitoring Panel can monitor the flow gate and pressure of any buildings sprinkler system.
MAXSYS offers many features including an advanced UL listed commercial fire system with a full complement of modules, including a dual-line dialer module, 24 VDC bell modules and a battery-charging module for high-current applications.
|
|
PC4020CF
• PC4050CR cabinet
• PC4701 module
• Built-in 16 VAC, 40VA transformer
• UL864 listed
|
 |
Automatic drift compensation
Built-in, dual-sensor heat detector (option)
Built-in 85 dB horn (option)
Easy-maintenance removable smoke chamber
Interconnectable using PRM-2W/4W polarity reversal modules
Non-contact sensitivity reading with handheld test meter (FSD-100)
Low profile design
Local test button
UL/ULC/CSFM/MEA/EN listed for commercial and residential applications
FSA-210
Model Description FSA-210(x)* 2-wire photoelectric smoke detector FSA-210(x)T* 2-wire photoelectric smoke detector w/ heat detector FSA-210(x)ST* 2-wire photoelectric smoke detector w/ integral sounder & heat detector FSA-210(x)RT* 2-wire photoelectric smoke detector w/ aux. relay & heat detector
FSA-410
Model Description FSA-410(x)* 4-wire photoelectric smoke detector FSA-410(x)T* 4-wire photoelectric smoke detector w/ heat detector FSA-410(x)RT* 4-wire photoelectric smoke detector w/ aux. relay & heat detector FSA-410(x)S* 4-wire photoelectric smoke detector w/ integral sounder FSA-410(x)ST* 4-wire photoelectric smoke detector w/ integral sounder & heat detector FSA-410(x)RST* 4-wire photoelectric smoke detector w/ integral sounder, aux. relay & heat detector
*Legend (x) = ‘A’ Canadian model number | (x) = ‘B’ U.S. model number
|
|
|
DSC Wireless Smoke Detector
Wireless Photoelectric Smoke Detector
• Low profile design
• Automatic drift compensation
• High/Low sensitivity reporting
• Built-in, dual-sensor heat detector
• 135 °F (57 °C)
This is an advanced smoke detector. This device will quickly indicate a fire condition to the security system, potentially saving life and property. Communication with the smoke detector is wireless and fully supervised. Additionally, this unit constantly checks itself for performance. In order to use this device, your security system must have 433MHz wireless support. (You must have a PC5132-433 wireless expansion kit or a LCD5501Z32-433 keypad).
|
|
|
Model ECS-100 - Fire Extinguisher Cabinet
Classic Metal Surface Cabinets are constructed of 18 ga. (1.19mm) baked white enamel steel. Designed for theft and vandalism protection in parking areas, schools, and mechanical rooms to safely store fire extinguishers. All cabinets come complete with cylinder lock keyed alike, plexiglass panel that can be removed for serving the fire extinguisher. Break glass hammer and break glass instruction decal also provided. Cabinets also available with a unique recessing frame for in wall mounting.
|
|
|
Fire Extinguishers
Protect your home or business with a fire extinguisher from SafeTech Alarm Systems.
We offer a variety of dry chemical, carbon dioxide, foam, clean agent, pressurized water and automatic fire extinguishers in several sizes.
|
|
Free ‘No Obligation’ analysis from a SafeTech Loss Prevention Expert!
|
...
