• Visible link quality indication shown on the device
• Programmable temperature warning and alarm thresholds
• Optional probe to monitor refrigerator, freezer and outdoor temperatures
• Front and back tamper protected
• Prolonged battery life (7 years with typical use)
• Dimensions: 81 x 32 x 25mm (3.19 x 1.25 x 1in)
• External temperature probe PGTEMP-PROBE
• Certified with ULC Wireless Commercial Burglary Listing under ULC-S304-16 Standard – an industry first in Canada!

The post Wireless PowerG Temperature Detector PG-9905 appeared first on SafeTech Alarms.

• Uses Cellular (3G) network for high-speed, reliable and low-cost communications to an IP receiver
• Automatically switches to 2G (EDGE/GPRS) if 3G service is not available
• Compatible with control panels that communicate using the Contact ID or SIA (300 baud) formats
• Full event reporting
• 4 on-board inputs with NC, NO or SEOL supervision
• 4 on-board outputs (open collector)
• Activation and initialization via automated telephone activation system (VRU), web-user or mobile interface provided by C24 Communications
• PTM (Panel Transmission Monitor) switches from PSTN to cellular on unsuccessful communication attempts
• Compatible with Sur-Gard System I-IP/II/III/IV/5 monitoring station receivers
• View communicator status directly from your mobile phone to support on-site or remote troubleshooting
• SMS command & control for panel arm/disarm
• PTM call routing to direct cellular signals to multiple receivers based on dialed number
• Advanced carrier selection to secure a suitable cellular connection
• Two unique trouble display models

The post Cellular Universal Wireless Alarm Communicator 3G-4010 appeared first on SafeTech Alarms.

Addressable Glass Break Detector
AMB-100

• Based on the Acuity hardwire glassbreak detector
• Detects all types of breaking glass: plate, laminated, safety and tempered
• Can be tested using the glassbreak simulator (AFT-100)
• Built-in tamper switch

The post Glass Break Detector appeared first on SafeTech Alarms.

Wireless Pet-Immune Passive Infrared Detector WS4904W/WS4904PW

• WS4904W replaces the WLS904L-433W
• WS4904PW replaces the WLS904PL-433W
• Based on the Bravo® 3D hardwire motion detector
• High-traffic shutdown
• WS4904PW features pet immunity up to 27 kg (60 lbs)
• 1 lithium battery included
• Approval Listings: European CE Directives (EMC, R&TTE, LVD), INCERT (Belgium), NCP (Holland), IMQ (Italy)
• Livello 1, SBSC (Sweden) Larmklass R, EN50131-2-2, EN50131-6, Grade 2, Class II Environment, ICASA (South
• Africa), FCC/IC, UL/ULC

The post Wireless Pet-Immune Passive Infrared Detector appeared first on SafeTech Alarms.

Wireless Flood Detector WS49850

• The wireless flood detector is based on the WS4945 wireless door/window contact that is connected to a water probe through a 6 foot-wire. The product is enrolled as a flood zone detector with the
• following DSC® control panels: Alexor, PowerSeries 9047, PC1616, PC1832, PC1864, PC4020, and is fully supervised.
• Built-in reed switch
• Normally closed external contact input
• 1 lithium battery included
• Available in brown housing
• Case and wall tamper
• End-of-line resistor
• 4-7 year battery life

The post Wireless Flood Detector appeared first on SafeTech Alarms.

Wireless CO Detector WS4913

• Colorless, tasteless, odorless but deadly, carbon monoxide (CO) is impossible to detect without a warning device. The WS4913 Wireless Carbon Monoxide Detector from DSC is the perfect complement to DSC’s ALEXOR and the 2-Way Wireless Security Suite. The WS4913 provides front-line protection against the silent threat of carbon monoxide poisoning.
• Slim-line design
• Built-in 85dB alarm at 10 ft (3 m)
• Malfunction supervision
• Low sensitivity supervision
• Electrochemical sensing technology
• Transmits RF status, low battery and tamper condition
• Hush feature
• Wall tamper
• Onboard LEDs indicate:
• * Red – Alarm
• * Yellow – T rouble
• * Green – Power
• *Amber – Warm Up
• 4-5 year battery life
• End-of-Life (EOL) indicator (5 year)
• Low battery supervision
• Compatible with ALEXOR

The post Wireless CO Detector appeared first on SafeTech Alarms.

GSM/GPRS Wireless Alarm Communicator GS2060

• Back up and primary GSM/GPRS alarm communication
• Panel remote uploading/downloading support via GSM/GPRS
• Supervision heartbeats via GSM/GPRS
• 128-bit AES encryption via GSM/GPRS
• Full event reporting
• SIA format
• SIM Card (included)
• PC-Link connection
• Signal strength and trouble display
• Remote activating and programming through Connect 24®
• Quad-Band: 850 MHz, 1900 MHz, 900 MHz and 1800 MHz
• Compatible with PC1864/1832/1616 control panels (version 4.1 and higher)
• Compatible with Sur-Gard® System I/II/III monitoring station receivers
• UL standard & encryted line security
• ULC passive or active line security levels

The post GSM/GPRS Wireless Alarm Communicator appeared first on SafeTech Alarms.

GSM Universal Wireless Alarm Communicator GS3060

• Compatible with control panels that communicate using the Contact ID format
• Full event reporting
• Uses GPRSdata channel for high-speed, reliable and low-cost communications to an IP receiver
• 4 on-board inputs
• 4 on-board outputs (open collector)
• SIM card (included)
• Activation and initialization via automated telephone activation system (VRU) or web-user interface provided by CONNECT 24
• Monitors the panel’s attempts to communicate to determine if GSM backup communications are necessary
• Compatible with Sur-Gard System II/III monitoring station receivers
• UL/ULC listed

The post GSM Universal Wireless Alarm Communicator appeared first on SafeTech Alarms.