Detection Devices

Cellular Universal Wireless Alarm Communicator 3G-4010

Uses Cellular (3G) network for high-speed, reliable and low-cost communications to an IP receiver
Automatically switches to 2G (EDGE/GPRS) if 3G service is not available
Compatible with control panels that communicate using the Contact ID or SIA (300 baud) formats
Full event reporting
4 on-board inputs with NC, NO or SEOL supervision
4 on-board outputs (open collector)
Activation and initialization via automated telephone activation system (VRU), web-user or mobile interface provided by C24 Communications
PTM (Panel Transmission Monitor) switches from PSTN to cellular on unsuccessful communication attempts
Compatible with Sur-Gard System I-IP/II/III/IV/5 monitoring station receivers
View communicator status directly from your mobile phone to support on-site or remote troubleshooting
SMS command & control for panel arm/disarm
PTM call routing to direct cellular signals to multiple receivers based on dialed number
Advanced carrier selection to secure a suitable cellular connection
Two unique trouble display models

The wireless flood detector is based on the WS4945 wireless door/window contact that is connected to a water probe through a 6 foot-wire. The product is enrolled as a flood zone detector with the
following DSC® control panels: Alexor, PowerSeries 9047, PC1616, PC1832, PC1864, PC4020, and is fully supervised.
Built-in reed switch
Normally closed external contact input
1 lithium battery included
Available in brown housing
Case and wall tamper
End-of-line resistor
4-7 year battery life

Visible link quality indication shown on the device
Programmable temperature warning and alarm thresholds
Optional probe to monitor refrigerator, freezer and outdoor temperatures
Front and back tamper protected
Prolonged battery life (7 years with typical use)
Dimensions: 81 x 32 x 25mm (3.19 x 1.25 x 1in)
External temperature probe PGTEMP-PROBE
Certified with ULC Wireless Commercial Burglary Listing under ULC-S304-16 Standard – an industry first in Canada!

Colorless, tasteless, odorless but deadly, carbon monoxide (CO) is impossible to detect without a warning device. The WS4913 Wireless Carbon Monoxide Detector from DSC is the perfect complement to DSC’s ALEXOR and the 2-Way Wireless Security Suite. The WS4913 provides front-line protection against the silent threat of carbon monoxide poisoning.
Slim-line design
Built-in 85dB alarm at 10 ft (3 m)
Malfunction supervision
Low sensitivity supervision
Electrochemical sensing technology
Transmits RF status, low battery and tamper condition
Hush feature
Wall tamper
Onboard LEDs indicate:
* Red – Alarm
* Yellow – T rouble
* Green – Power
*Amber – Warm Up
4-5 year battery life
End-of-Life (EOL) indicator (5 year)
Low battery supervision
Compatible with ALEXOR

WS4904W replaces the WLS904L-433W
WS4904PW replaces the WLS904PL-433W
Based on the Bravo® 3D hardwire motion detector
High-traffic shutdown
WS4904PW features pet immunity up to 27 kg (60 lbs)
1 lithium battery included
Approval Listings: European CE Directives (EMC, R&TTE, LVD), INCERT (Belgium), NCP (Holland), IMQ (Italy)
Livello 1, SBSC (Sweden) Larmklass R, EN50131-2-2, EN50131-6, Grade 2, Class II Environment, ICASA (South
Africa), FCC/IC, UL/ULC