• Mon - Fri: 8:30am - 8:00pm
  • Sat: 11am - 4:00pm
  • 1-888-939-3733

Wireless Cameras

200 Floors Wireless Video System

Elevator Wireless Video System

Many elevators are equipped with hard-wired surveillance cameras, which are extremely costly requiring hours of labor, hundreds of feet in traveling cable and the inconvenience of closing a vital service down for hours if not days. Using VideoComm Technologies’ new wireless elevator video system, this property manager was able to have a working system installed and fully functional within three hours saving both time and keeping costs down.
The installer in this application mounted the video transmitter in the false ceiling of the elevator cab, connected the video cable from the corner mount camera and powered the device on. The same method was used at the top of the shaft where the receiver was mounted on the exterior wall in the elevator mechanical penthouse.

Until now, wireless video systems have not been a practical option when installing an elevator surveillance camera. The harsh RF environments in commercial and residential buildings caused by 802.11b/g data networks, along with the constant motion of an elevator surrounded by steel interfered with wireless analog systems and consequently output a poor video signal. VideoComm Technologies all-new Wireless Elevator Surveillance system transmits high-resolution encrypted digital video up to 200 floors. This innovative system is the only wireless system on the market capable of transmitting license-free video in the most crowded RF environments with advanced OFDM digital immunity to signal interference and a 64-bit encrypted data stream. The RT-Wave series features a revolutionary pre-configured design and does not require setup, software or programming, minimizing installation time and maximizing results.

The industry’s only wireless elevator camera system delivers Real-Time, DVD quality encrypted digital video up to 200 Floors. Featuring a revolutionary pre-configured plug-and-play design, the system does not require software, setup or programming, minimizing installation time and maximizing results. Choose this wireless system for the most extreme elevator surveillance applications.

All New 5.8GHz Mobile OFDM Dual Diversity 802.11a Wireless Elevator Video System Range up to 200 Floors.


  • Revolutionary pre-configured plug & play design
  • Transmits Real-Time DVD quality video up to 200 floors
  • Digital immunity to signal interference
  • Lightning fast hardware based MPEG-4 encoder & decoder
  • Industry leading 5-tier input power management system
  • 64 Bit encrypted data stream (optional 128 bit)
  • Automatic system pairing and on screen status display
  • No connections to the elevator mechanics or traveling cable
  • No maintenance or inspections required
  • Deters vandalism, trespassing & other criminal behavior
  • Easily identify employees, residents, and visitors
  • FCC & IC approved for license free use


All New 5.8GHz Mobile OFDM Dual Diversity 802.11a Wireless Elevator Video System Range up to 200 Floors. 
Operating Frequency:Dual Radio 5.725GHz – 5.875GHz @ 20MHz Bandwidth
Frequency Control:Automatic Channel Selection
Modulation Format:OFDM (BPSK, QPSK, 16QAM, 64QAM)
Security Authentication System:Private SSID 64 Bit Encrypted Data Stream (WEP) Optional 128 Bit
Data Rate:6 mbps – 54 mbps
Latency:Less than 0.5 sec
Video Compression Format:Hardware Based MPEG-4
Radiated Power:450mW
Range (Line of Sight):Up to 200 Floors
Antenna Type:6 x 3dB Omni-Directional Rubber Duck Antennas
Antenna Dimensions:0.75 IN x 6.25 IN
E Plane Beam Width:50 Degrees
H Plane Beam Width:360 Degrees
VSWR (Return Loss):<1.5:1
Antenna Gain:3dB
Camera Type:Corner Mount 1/3 IN Color SONY CCD
Lens Type:Board lens 2.8mm @F2.0
S/N Ratio:>48dB (AGC Off)
SYNC / White Balance:Automatic
Minimum Illumination:0.4 Lux / F1.2
Camera Construction:Vandal Proof IP-66 Rated Enclosure
Camera Weight:1,650g or 3.6lbs
Video Format:NTSC
Frame Rate:30fps NTSC / 25fps PAL
Receiver Sensitivity:54 mbps @ -72dBm to 6 mbps @ -90dBm
Resolution:480 Lines
Video Connector Format:BNC Male 75 OHMS @ 1 Volt Peak-to-Peak
Video Impedance & Level:75 Ohms @ 1 Volt Peak to Peak
Audio Connector Format:BNC Male
Audio Impedance & Level:600 Ohms @ 1 Volt Peak-to-Peak
Power Supply Included:Switching 12VDC @ 2 Amps – CEC Class IV
Current Consumption:0.8 Amps
Operating Voltage:12 – 30 Volts AC or DC
Surge Protection:ESD Surge / Lightning Protected up to 1,500 Watts
Mounting Brackets Included:Two Universal Wall / Pole Mount – # BRK-250
Temperature Range:-40F to +160F
Dimensions:7.0 IN x 7.0 IN x 4.5 IN Each Enclosure / Camera 8 IN x 8 IN x 3 IN
Weight:0.8kg or 29oz Each Enclosure
Includes:All Weather Digital Tx & Rx, Remote Control, 6 x 3dB Rubber Duck Antennas, 2 x 12VDC Power Supplies, 2 x Universal Mounting Brackets, Vandal Proof Corner Mount Camera, Operating Instructions & One Year Limited Warranty
FCC / IC Approved:License Free – Professional Installation

4 x Night Vision 2.4GHz Waterproof Wireless Digital Camera Security Kit4X 2.4GHz, Up to four cameras supported (Optional), USB mini receiver to work with PC by software, Quad video and recording, Network Remote Monitoring, Motion Detection, Night vision and waterproof camera.


  • Image Sensor: 1/4″ CMOS
  • Effective Pixels: 628 x 582 (PAL) / 510 x 492 (NTSC)
  • Horizontal Resolution: 380 Line
  • Transmission distance in the open place: 150-200m
  • Outdoor waterproof
  • 8-10 meters night vision range
  • Working with 4 cameras max, quad display
  • Professional 2.4GHz digital wireless security camera
  • Four channel available monitoring at the same time
  • Network remote monitoring
  • 100% safe signal, privacy guaranteed
  • Receiver resolution: 480 x 240
  • Audio & Video recording, image capturing
  • Receive Frequency: 2.4-2.48GHz
  • Digital modulation mode: GFSK
  • Sensitivity: <=-85dBm
  • Consumption: <=1W
  • Cameras * 4
  • Bracket for camera * 4
  • Antenna * 4
  • 100-240V power adapter * 4
  • Mounting hardware (bag) * 1
  • Software CD * 1
  • English user manual * 1
night-vision-wireless-camera-SED-CAM-WL271KIT-packagenight-vision-wireless-camera-SED-CAM-WL271KIT-package bnight-vision-wireless-camera-SED-CAM-WL271KIT-package b

Single Camera Wireless DVR Kit

Indoor/Outdoor Wireless Surveillance Camera with DVR

Set up this wireless surveillance camera with DVR nearly anywhere, and monitor whatever you’re concerned about day or night. 2.4 GHz digital transmission eliminates the need to run video cabling between your camera and the included DVR. Since the signal is digital, interference and “cross-over” with other devices is eliminated. Connect the receiver to any TV or monitor with an RCA port to monitor live. Since video is stored to an SD card (up to 32 GB, not included) you can view recorded video on a monitor or back up and view files on a PC.
With its 30-foot motion detection range and 50-foot night vision, this device is perfect for setting up on a garage or to monitor a driveway. Camera and receiver can be up to 400 feet apart and still provide a clear image. This wireless surveillance camera records in full color when light is available, and automatically changes to IR night vision when in low light or darkness, which is black and white.

Simple to set up; just plug the receiver into power and a monitor, insert an SD card, connect the camera to power within range, and see what your camera sees.

Single Camera Wireless DVR Kit Features

  • Motion Detection
  • IR Night vision
  • LOS 2.4 GHz Digital Transmission
  • 10x Digital Zoom
  • Power: DC12V
  • Max SD Capacity: 32GB
  • Video Resolution: 640×480
  • Frame Rate: 20fps
  • Video Format: AVI
  • Motion Detection Range: 30 feet
  • LED Range: 50 feet
  • Weight: 3lbs
  • Camera: 4″ long, 2″ across
  • 1x 2.4Ghz Camera with LED
  • 1x Digital Video receiver with DVR
  • 2x A/C Adaptor
  • A/V Cable

All-Weather 5.8GHz IR camera


5.8GHz All-Weather 8-CH 520-Res Color 8mm Sony CCD up to 100ft IR, Camera Only

All-Weather 5.8GHz IR camera Features

  • Easy to install and operate “Plug & Play”
  • NTSC & PAL Models Available
  • 8 user selectable channels
  • No interference from 2.4GHz 802.11 b/g data networks
  • High-resolution Day/Night Color Camera
  • Rugged all-weather IP-66 rated metal case design
  • Universal Wall or Ceiling Mounting Bracket
  • Ideal for surveillance or monitoring applications
  • One Year Limited Warranty

Item Specifications

ModelZX-520SR100Operating Frequency:5.725 GHz – 5.875 GHzChannels:8 User Selectable ChannelsRadiated Power:50 mV / m @ 3MRange with Optional RX Antenna: Up to 1,000′Antenna Type: 3dB Omni-Directional Rubber DuckCamera Type: 1/3 IN Color Day/Night Sony CCDLens Type: Board Lens 8mm @ F2.0IR Range: 100 Feet with 60 IR LEDsCamera Construction: All-Weather IP-66 Aluminum DesignCamera Weight: 1,000g or 2.2lbsVideo Format: NTSCFrame Rate: 30fps NTSC / 25fps PALReceiver Included: Sold SeparatelyResolution: 520 LinesPower Supply Included: PS-1250Current Consumption: 620mA @ 12 VDC IR ONOperating Voltage: 12VDC Polarity ProtectedMounting Brackets Included: Universal Wall / Ceiling BracketTemperature Range: -30F to +170FWeather Proof: IP-66 Rated All Weather Aluminum DesignDimensions: 7 IN x 4 IN x 3.7 INWeight: 1,000g or 2.2lbsFCC / IC Approved: Yes

2.4GHz IR Night Vision Waterproof Wireless Digital Security Camera
  • Horizontal Resolution: 380 Line
  • Transmission distance in the open place: 150-200m
  • Outdoor waterproof
  • 8-10 meters night vision range
  • Receive Frequency: 2.4-2.48GHz
  • Color: Black
  • Four channel available monitoring at the same time
  • Network remote monitoring
  • 100% safe signal, privacy guaranteed
  • Image Sensor: 1/4″ CMOS
  • Effective Pixels: 628 x 582 (PAL) / 510 x 492 (NTSC)
  • Digital modulation mode: GFSK
  • Sensitivity: <=-85dBm
  • Consumption: <=1W
  • Cameras x 1
  • Bracket for camera x 1
  • Antenna x 1
  • 100-240V power adapter x 1
  • Mounting hardware (bag) x 1
  • Software CD x 1
  • English user manual x 1
2.4GHz IR Night Vision Waterproof Wireless Digital Security Camera Kit